مواسير ولوازم المواسير
BG شد وصل 1/2 انش
All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure,Separation Strength TestVacuum TestThermal Cycle TestPressure Cycle TestTensile Corrosion Resistance TestCoating Thickness Determination Test (It is applied to the material other than standard tests.)Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C.Attachments must be installed by a qualified plumber.Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation.Attachments should be used with original fittings.Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings.During assembly, the attachment must be tightened with a suitable key from the key mouth parts.Abrasive materials should not be used for attachment cleaning.The installation must be protected against the risk of frost.It should be protected against external impacts during storage, transportation, assembly and use. All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile
2.250 JD
Mega Hardware L كوع كروم ايطالي 0.5انش
Product Description Elbow chrome ITALY 1/2"
1.650 JD
Mega Hardware L نبل كروم مزوج 3/4 انش
1.000 JD
Mega Hardware L محبس نحاس 3/8 انش
Product Description BALL VALVE WITH LEVER 3/8"
1.500 JD
Mega Hardware L وصلة بطارية 3/4 انش ايطالي
Chrome Nipple Size 3/4″ ITALY
0.900 JD
Jindal تي 1/4 انش نحاس ايطالي
2.350 JD
Jindal مربط بربيش 21-38مم
Product Description HOSE CLAMPS 21-38mm
0.250 JD
Jindal مفة كروم 1/2 انش
0.500 JD
Jindal وصله كروم مفرد 1/2*1/4 انش
2.250 JD
2.000 JD
Jindal رداد فلتر بلاستيك ابيض
Suitable for use in hot and cold water Enogh strong to pressure membrane waste and smooth to save RO membrane from blockage Made by food grade plastic
5.000 JD
BSP كوع ستريت ايطالي 1/2 انش
Chrome plated brass BSP threaded pipe fittings are being used to join pipes for water and heating systems. Angled 90 deg elbow fitting comes in 3/8, 1/2 or 3/4 Inch BSP thread size, male on one end and female on the other end.- Type: elbow;- Thread size: 3/8, 1/2 BSP Male x Female;- Material: chrome plated brass;- Max. working temperature: +100C;- Max. working pressure: 1,0MPa (10 bar).
1.500 JD
Mega Hardware L نبل كروم 1/2 انش 15 ملم
Chrome C.P Extension Nipple Size : 1/2″ x 15MM
1.000 JD
Mega Hardware L نبل كروم ايطالي 0.5انش
Product Description NIPPEL MALE CHROME 1/2"
0.800 JD
Mega Hardware L نبل كروم ايطالي 3/4انش
Product Description NIPPEL MALE CHROME 3/4"
0.900 JD
Mega Hardware L نبل بربيش نحاس 3/4 إنش
0.500 JD
Mega Hardware L هواية ايطالي 3/8 انش
3/8 "brass automatic air valve automatic air vents for solar water heater pressure relief valves
3.700 JD
Mega Hardware L هواية ايطالي 3/8 انش
2.700 JD
Mega Hardware L كوع كروم ايطالي 3/8انش
Product Description CHROME PLATED ELBOW 3/8"on
1.900 JD
Mega Hardware L كوع ستريت نحاس 3/8 انش
2.350 JD
Amman hardware صمام إغلاق تلقائي مع توصيل سريع 1/4 بوصة
REVERSE OSMOSIS SHUT OFF VALVE WITH 1/4" QUICK CONNECT.AUTO SHUT OFF VALVE FOR REVERSE OSMOSIS WATER FILTER SYSTEM
2.250 JD
Mega Hardware L نبل حديد 1.25انش
Malleable Cast iron fittings are distinguished from other types on the market, because of high mechanical stress and temperature resistance, due to the use of very high quality alloy cast iron (EN-GJMW-400-5 to EN 1562).Suitable for working pressures up to 25bar at 125 ° CMaximum test pressure: 1,5 x design pressureThreads according to EN10226-1; female tread to BSPP thread (cylindrical) and male thread to BSPT (conical).Fields of application:Plumbing, HVAC, sprinkler systems, air lines etc.
2.100 JD
Mega Hardware L مفة حديد 3/4 انش
304 stainless steel castings conform to ASTM A351 ACI Grade CF8 316 stainless steel casting conform to ACI Grade CF8M (316) NPT threads on pipe fittings conform to ASME B1.20.1 Manufacturing facility is ISO 9001:2008 Certified pipe fittings meet applicable chemical & mechanical properties Quality guarantee on all pipe fittings
0.450 JD
Mega Hardware L مفة حديد ابيض 1/2 انش
304 stainless steel castings conform to ASTM A351 ACI Grade CF8 316 stainless steel casting conform to ACI Grade CF8M (316) NPT threads on pipe fittings conform to ASME B1.20.1 Manufacturing facility is ISO 9001:2008 Certified pipe fittings meet applicable chemical & mechanical properties Quality guarantee on all pipe fittings
0.300 JD
